SHURE PSM200 Wireless In-Ear Monitoring System
The entry to professional in ear personal monitoring from Shure containing all the components you need
Key Features:
- Built-in audio limiter
- Front mounted antenna
- Two mic/line input channels for mix control
- Built in headphone limiter
- Volume control on bodypack receiver
- 1/2 Rack space
Product Code: 200008157
Pricematch:
Contact us via online chat module to request pricematch
The entry to professional in ear personal monitoring from Shure. This package contains SE-112 Sound Isolating earphones, a P2R receiver and a P2T transmixer.
SE112
- Sound Isolating Design, blocks up to 37 dB of ambient noise
- Driver: Single DynamicMicroDriver
- Frequency response: 25 Hz - 17 kHz
P2R WIRELESS BODYPACK
- Can operate as a wired or wireless bodypack, or both simulaneously
- Frequency locator
- Built-in headphone limiter
- Integrated cable management
- High-impact plastic chassis
- 1/4" Line input jack with high/low gain switch
P2T WIRELESS TRANSMIXER
- Input level control
- Frequency select
- Built-in audio limiter
- Front mounted antenna
- Two mic/line input channels for mix control
- 1/2 Rack space
- LED Indicators
- Tri-color input level
-
- RF Output Power: 10 - 30 mW (countryspecific)
- Operating Distance: Up to 100m
- Harmonic distortion: 1.5 % typical
- Signal-to-noise-ratio: 80 dB (A) typical
- Listening mode: Mono
- Compatible Systems per band (up to): 4
- Transmitter Inputs: 2x XLR/6,3 mm combo, mic/line level
- Transmitter Outputs: 2x XLR split outputs
- Wired Bodypack Option: Yes
- Personal Mix Control: On transmitter
- Remoteable Transmitter: No
- Battery Life: Wired: 6 h; Wireless: 4 h
- Frequency Response: 30 Hz - 12 kHz
- Further technical specifications:
PSM®200 System
- RF Carrier Frequency Range: 518-865 MHz (country dependent)
- Modulation: FM +/- 35 kHz Deviation (Nominal)
- Operating Temperature: -7 degrees C to +49 degrees C (+20 degrees F to +120 degrees F)
EP2T TransMixer
- Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
- Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
- Connector Type: XLR/1/4-inch combo
- Nominal Input Level: - 25 dBu @ 1/2 volume (12 o'clock)
- Maximum Input Level: - 5 dBu @ 1/2 volume (12 o'clock)
- Current: 170 mA maximum
- Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
- Net Weight: 370 g (13 oz.)
P2R Receiver
- RF Sensitivity: 109 dBm typical
- Squelch Threshold: 102 dBm typical
- Antenna: Attached Whip
- Audio Input Connector: Connector Type: 1/4-inch Mono
- Impedance: 1 megohm
- Maximum Input Level: LO = +0 dBu; HI = 10 dBu
- Frequency Response: 30 Hz to 20 kHz (+/ 3 dB); earphone dependent
- Power Requirements: 9 V alkaline battery, Duracell® type MN1604 recommended
- Audio Output Connector: 1/8 inch (3.5 mm)
- Minimum Load Impedance: 8 ohms
- Net Weight: 100 g (3.52 oz.), less battery
- Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)
SE112 Earphones
- Frequency Range: 25Hz – 17.5kHz
- Sensitivity: 108 dB SPL/mW (@ 1kHz)
- Impedance: 16 Ohms (@ 1kHz)
- Input Connector: 3.5mm (1/8”)
- Colour: Gray
- Cable Length: 127 cm (64”)
- RF Carrier Frequency Range: 518-865 MHz (country dependent)