SENNHEISER EWD1-ME3-H-UK Wireless D1 Headmic Set
The Sennheiser EWD1-ME3-H-UK is a wireless headmic system for live stage use.
Key Features:
- Lightweight and robust: headset microphone for excellent speech intelligibility
- Up to 15 compatible channels (under optimal conditions) in license-free 2.4 GHz band
- Automatic frequency management
- Prevents interference: Intelligent channel back-up
- Audio effects: equalizer, de-esser, automatic gain control
- iOS & Android app for remote control and monitoring of the system
- Sturdy metal housing
Product Code: 100248887
Pricematch:
Contact us via online chat module to request pricematch
Evolution wireless D1 is a digital sound transmission system that makes no compromises when it comes down to reliability, sound quality or user-friendliness. It can run up to 15 output lines in parallel and independently adjust the sensitivity of every transmission.
System
| RF frequency range | 2,400 to 2,483.5 MHz | |
|---|---|---|
| Dynamic range | > 135 dB (A) | |
| THD, total harmonic distortion | typ. < 0,1 % | |
| Audio sampling | 24 bit/48 kHz | |
| Signal-to-noise ratio | ≥ 105 dB (A) | |
| Modulation | GFSK with back channel | |
| Transmission method | TDMA, time diversity, frequency diversity, fast switching antenna diversity | |
| Latency | 3.9 ms | |
| Audio codec | APT-X Live | |
| Operating temperature | Operation: – 10 °C to +55 °C | |
| Storage temperature | Storage: – 20 °C to +70 °C (The temperature range is influenced by the battery characteristics) | |
| Frequency response | 20 to 20.000 Hz | |
EM D1
| Latency | multi-frequency targets | |
|---|---|---|
| RF sensitivity | <-90 dBm | |
| RF output power | back channel 10 mW/100 mW (country-specific) | |
| Audio output | Mic/line level switch –24 dB/0 dB, XLR, balanced max +18 dBu, Jack, unbalanced/balanced max +12 dBu/max +18 dBu | |
| Low-cut filter | –3 dB at 120 Hz | |
| Equalizer | 7-band graphic equalizer | |
| Automatic gain control (AGC) | compression/expansion with automatic make-up gain function | |
| Display | OLED | |
| Connection | XLR/¼" (6.3 mm) jack | |
| Antenna connector | 2 x Rev-SMA | |
| Network socket | RJ45 | |
| Network protocol | Media Control Protocol, TCP/IP IPv4 (DHCP, Manual)/IPv6 | |
| Power supply | 12 V DC hollow jack | |
| Current consumption | 350 mA | |
| Weight | approx. 824 g | |
SK D1
| RF output power | adaptive, up to 100 mW (country-specific) | |
|---|---|---|
| Connection | 3.5 mm jack socket, lockable | |
| Weight | approx. 85 g (w/o batteries) | |
| Microphone | Frequency response: 50 to 20,000 Hz | |
| Max. input level: 2.2 V RMS | ||
| Line | Frequency response: 20 to 20,000 Hz | |
| Max. input level: 3.3 V RMS | ||
| Input impedance | 1 MΩ | |
| Input sensitivity | automatic sensitivity adjustment | |
| Battery Specification | 2 x AA size battery (1,5V), Operating time: typ. 6 h | |
| Accupack | BA 30 (Li-Ion, 3.7V), Operating time: typ. 11 h | |
ME 3 II
| Microphone | pre-polarized condenser | |
|---|---|---|
| Sensitivity | 1.6 mV/Pa | |
| Pick-up pattern | cardioid | |
| Max. sound pressure level | 150 dB SPL | |
What's in the box?
- EM-D1 rackmount receiver
- SK-D1 bodypack transmitter
- ME 3-II headset microphone
- NT-12 power supply
- Transport Case
- User Manual
-
Lightweight and robust: headset microphone for excellent speech intelligibility
-
Up to 15 compatible channels (under optimal conditions) in license-free 2.4 GHz band
-
Automatic frequency management
-
Prevents interference: Intelligent channel back-up allows co-existence with Wi-Fi & Bluetooth
-
Audio effects: equalizer, de-esser, automatic gain control
-
iOS & Android app for remote control and monitoring of the system
-
Sturdy metal housing