Rode Videomic Pro R Mobile Kit
The Rode Videomic Pro-R Mobile Kit is an ideal option for videographers and for recording music. Includes free SC4 TRS to TRSS Cable.
Key Features:
- Rycote Lyre shock mounting onboard
- Broadcast recording quality on-camera microphone
- All new matched pair 1/2” condenser capsules in XY stereo configuration
- Improved foam windscreen
- Ultra lightweight, compact form factor
- On mic power and EQ controls
- Two step High Pass Filter (fl at, 75Hz)
Product Code: 600002225
Pricematch:
Contact us via online chat module to request pricematch
The Rode Videomic Pro-R Mobile Kit includes a free SC4 TRS to TRSS Cable is an ideal option for videographers and for recording music.
The Rode VideoMic Pro is a high performance shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders for primary and reference audio. The microphone features a 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.
The integrated Rycote® Lyre® based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.
Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.
The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting.
Main features of the Rode VideoMic Pro include:
| Acoustic Principle: | Pressure Gradient |
| Active Electronics: | JFET impedance converter |
| Capsule: | 0.50" |
| Address Type: | End |
| Frequency Range: | 40Hz - 20kHz |
| Output Impedance: | 200O |
| Maximum SPL: | 134dB SPL (@ 1kHz, 1% THD into 1KO load) |
| Sensitivity: | -38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Equivalent Noise Level (A-weighted): | 18dB-A |
| Weight: | 116gm |
| Dimensions: | 134mmH x 80mmW x 115mmD |