RADIAL Pro RMP Passive Studio Reamper

Plug and play easy to use, the ProRMP connects from the recorder to your amp and effects units and does all the impedance matching for you. Just adjust the level to suit! The Radial ProRMP is a 100% passive Reamper. This means it does not require any external powering. The magic behind the ProRMP's great tone is a custom wound transformer that at once converts the balanced line level source to a hi-z output for your amp while also acting as an electrical isolator to eliminate troublesome ground loops that can often cause buzz and hum in the sound.

Audio circuit type: Passive, transformer isolated

Frequency response: 20Hz ~ 20KHz (+0/-1dB)

Dynamic range: >137db

Equilavent input noise: >-98dbu Noise plus gain

Phase deviation: 0.3° @ 100Hz; 5° @ 20Hz

Gain: >-10db

Maximum input: >+26dbu

Total harmonic distortion: 0.003%

Common mode rejection ratio: 100dB @ 60Hz (unbalanced source)

Input impedance: 600 Ohms

Output impedance: 600?, balanced

Noise: -111dbu

Signal to noise ratio: 81db

Features

Input pad: -15dB

180° polarity reverse: Inverts signal polarity

Ground lift: Disconnects pin-1 at XLR output

Merge: Input summing mixer

Speaker filter: -30dB pad and band-pass filter

XLR configuration: AES standard (pin-2 hot)

General

Power: Passive, no power required

Construction: 14 gauge steel chassis and outer shell

Finish: Durable powder coat

Size: Size: 3.3" x 5.0" x 2" (84 x 127 x 48mm)

Weight: 1.55 lbs (720 g)

Conditions: For use in dry locations only between 5°C and 40°C

Warranty: Radial 3-year, transferable

Click Here for Graph Guide

Play pre-recorded tracks through amps and pedals

On board level control for fine tuning amp level

Transformer isolated to eliminate buzz and hum

Opens the door to creative new tones and textures