Trust pilot
Trust pilot
Trust pilot
Trust pilot

Presonus Studio 192 26x32 Audio Interface

The Presonus Studio 192 is a 26x32 USB 3.0 Audio Interface And Studio Command Centre

Key Features:

  • 26x32, 24-bit, 192 kHz audio interface and studio command center
  • Input monitoring with StudioLive® Fat Channel DSP processing on every analog input and the first ADAT inputs
  • Integrated zero-latency monitoring
  • Speaker switching and talkback

    view all PRESONUS products

    Product Code: 100265744

    Availability: Pre Order

    £789.00

    Pricematch:

    Contact us via online chat module to request pricematch

    Built to Create.

    The PreSonus® Studio 192 USB 3.0 audio interface delivers exceptional sonic fidelity, flexible connectivity, and professional monitoring and mixing controls in a single rack space. Whether you’re a producer, an audio engineer, an independent band, a sound designer, or all of the above, your Studio 192 was built for you to create.

     

     

    Your studio command center.

    The Studio 192 is designed to be the central hub for any project or professional studio. The onboard talkback mic can be routed to any mix. Onboard Dim and Mono options let you take control of your main mix. Listen to any mix from either headphone amp. Use the ten balanced outputs for monitor mixing, speaker switching, or both, depending on how you work. With its flexible software and abundant I/O, the Studio 192 fits into any recording and production environment.

     

     



    Superior sound.

    Audiophile-grade digital converters, ultra-low jitter clocking, and recallable preamps add up to a superior recording and listening experience. The Studio 192 operates at up to 192 kHz for ultra-high-definition mixing and recording. High-quality Burr-Brown converters on every input and output provide 118 dB of dynamic range to capture complex musical harmonics smoothly and naturally with no audible distortion. And our recallable XMAX microphone preamps deliver incredibly high headroom, deep lows, smooth highs, and a rich overall sound so you’ll hear every breath, transient, and detail in your recordings.

    The Studio One in Studio 192.

    With the Studio 192, your audio interface is an integrated extension of your recording environment. Launch Studio One® 3, and you’ll find full preamp control and  monitor-mix functions integrated into your recording environment. Our hybrid Fat Channel plug-in runs on the Studio 192’s DSP and in Studio One on your computer so you can record and monitor with Studio 192-based processing and seamlessly switch to the Studio One Fat Channel for playback. Need to track away from your computer? Launch Studio One Remote on your iPad®.

     

    Remote control with UC Surface, too!

     

    The Studio 192’s onboard features can also be controlled in PreSonus’ free UC Surface control software, so even if you use third-party recording software, you can remotely access them. UC Surface has rapidly won accolades for an intuitive mixing interface that provides quick access to everything you need to create quality monitor mixes.

    Great signal processors are a PreSonus tradition.

    Adding just the right amount of effects and processing to a monitor mix can make a huge difference in a musician’s ability to experience their performance naturally. To that end, the Studio 192 provides sixteen instances of Studio One’s Fat Channel plug-in, one for every analog input and the first ADAT inputs, plus a stereo reverb and delay. The result is a better performance and a better recording.

     

    Expandable when you need more I/O.

    The Studio 192 has 18 digital inputs and outputs, allowing you to add more analog I/O when you need it. The DigiMax DP88 preamp/converter was designed to seamlessly extend the analog I/O on the Studio 192 with eight digitally-controlled XMAX preamps, ADAT I/O support up to 96 kHz, direct analog inputs, DAC outputs, and word clock I/O. Its mic preamps are fully remote-controllable from UC Surface, Studio One, and Studio One Remote when connected via ADAT Lightpipe to the Studio 192 so that they naturally extend your analog inputs both sonically and functionally.

     

     

    Technical Specifications

    Mi​crophone Preamp 
    Type XLR Female (via Combo), Balanced Remote
    Maximum Input level (min. gain, 1 kHz@0.5% THD+N) +12 dBu, +/-0.5 dB
    Gain Control Range 60 dB, +/-1 dB
    Frequency Response (A-D) 10 Hz to 40 kHz, +/-0.2 dB
    Dynamic Range (min. gain, a-wtd) > 110 dB
    Dynamic Range (mid. Gain, unwtd) > 105 dB
    THD+N (min. gain, a-wtd) < 0.005%
    Input Impedance 1600 Ω
    EIN (+55 dB gain, 150Ω input, 20 Hz-22 kHz, a-wtd) < 128 dBu
    Common Mode Rejection Ratio (1 kHz, +55dB gain) > 55 dB
    Phantom Power +48 V, +/- 3 V, > 8mA per channel
    Instrument Inputs 
    Type ¼” TS Female (via Combo), Unbalanced
    Maximum Input Level (min. gain, 1 kHz@0.5% THD+N) +16 dBu +/-0.5 dB
    Gain Control Range 60 dB, +/-1 dB
    Frequency Response (A-D) 20 Hz to 20 kHz, +/-0.2 dB
    Dynamic Range (min. gain, a-wtd) > 110 dB dB
    Dynamic Range (mid. Gain, unwtd) > 105 dB
    THD+N (1 kHz, -1 dBFS, a-wtd) < 0.005%
    THD+N (1 kHz, -1 dBFS, un-wtd) < 0.005%
    Input Impedance > 1 MΩ
    Crosstalk (1 kHz, channel-to-channel) < -80 dB
    Line Inputs 
    Type ¼” TRS Female (via Combo), Balanced
    Maximum Input Level (min. gain, 1 kHz@0.5% THD+N) + 18 dBu, +/-0.5 dB
    Frequency Response (A-D) 20 Hz to 20 kHz, +/-0.2 dB
    Dynamic Range (min. gain, a-wtd) > 114 dB
    Dynamic Range (mid. gain, unwtd) > 105 dB
    THD+N (1 kHz, -1 dBFS, a-wtd) < 0.005%
    Input Impedance 10 kΩ
    Crosstalk (1 kHz, channel-to-channel) < -80 dB
    Main and Line Outputs 
    Type (Line Outputs) ¼” TRS Female, Impedance Balanced
    Type (Main Outputs) ¼” TRS Female, Impedance Balanced
    Maximum Output Level +18 dBu, +/-0.5 dB
    Frequency Response 20 Hz to 20 kHz, +/-0.2 dB
    Dynamic Range (a-wtd) > 112 dB
    THD+N (1 kHz, -1 dBFS, un-wtd) < 0.005%
    Output Impedance 51 Ω
    Crosstalk (1 kHz, channel-to-channel) < -80 dB
    Headphone Outputs 
    Type ¼” TRS Female, Stereo, Unbalanced
    Maximum Output Level 150 mW/channel @ 60 Ω
    Frequency Response 20 Hz to 20 kHz, +/-0.3 dB
    Dynamic Range (a-wtd) > 103 dB
    THD+N (1 kHz, -1 dBFS, un-wtd) < 0.005%
    Crosstalk (1 kHz, channel-to-channel) < -80 dB
    Internal Talkback Microphone 
    Type Electret Condenser
    Sensitivity -42 dB
    Signal Level LEDs 
    Signal 1 -50 dBFS
    Signal 2 -30 dBFS
    Signal 3 -20 dBFS
    Signal 4 -10 dBFS
    Signal 5 -6 dBFS
    Signal 6 -4 dBFS
    Signal 7 -2 dBFS
    Clip -0.5 dBFS
    Digital Audio 
    Host Interface USB 3.0 (backwards compatible to USB 2.0)
    ADC Dynamic Range (A-wtd, 48 kHz) 118 dB
    DAC Dynamic Range (A-wtd, 48 kHz) 118 dB
    Bit Depth 24 bits
    Internally Supported Sample Rates 44.1, 48, 88.2, 96, 176.4, 192 kHz
    ADAT Optical I/O ADAT/SMUX II formats supported [16x16 (44.1/48 kHz), 8x8 (88.2/96 kHz)]
    S/PDIF I/O RCA female connections, supported up to 96 kHz
    Word Clock I/O BNC connector, 4.5 Vpp @75Ω load
    Clock 
    Jitter <50 ps RMS (20 Hz – 20 kHz)
    Jitter Attenuation >60 dB (1 ns in => 1 ps out)
    Power 
    External Power Adapter +12 VDC, 3.0A, center positive
    Connector Type Barrel:  5.5 mm OD, 2.1 mm ID, 9.5 mm length
    Physical 
    Dimensions 1U rackmount
    Height 1.75” (44.45 mm)
    Depth 5.5” (139.7 mm)
    Width 19” (482.6 mm)
    Weight 4.9 lb. (2.22 kg)

    As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.

     

    Computer system requirements:

    Below are the minimum computer-system requirements for the Studio 192:


    Mac

    • Operating System: Mac® OS X 10.8 or later Hardware
    • Minimum: Intel® Core™ 2 processor, 4 GB RAM
    • Recommended Hardware: Intel Core i3 processor or better, 8 GB or more RAM


    Windows

    • Windows® 7x 64/x86 SP1 or Windows 8/8.1 x64, Windows 10 x64
    • Intel Core 2 processor (Intel Core i3 processor or better recommended)
    • 4 GB RAM (8 GB or more recommended)


    ​Windows and Mac

    • USB 2.0 port (USB 3.0 recommended)
    • Internet connection
    • Monitor resolution of 1280 x 800 px or higher
    • 20 GB hard-disk space
    • Internal or external 7200 RPM storage drive highly recommended
    Note: The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
    The speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system.

    General Features

    • 26x32, 24-bit, 192 kHz audio interface and studio command center
    • Input monitoring with StudioLive® Fat Channel DSP processing on every analog input and the first ADAT inputs
    • Integrated zero-latency monitoring
    • Speaker switching and talkback

    Integrated Software

    • Total integration with included Studio One® Artist DAW software (Mac®/Windows®) for multitrack music production, monitor mixing with effects, and studio command features
    • Wireless control over preamp levels, monitor mixing, and speaker switching from included UC Surface touch-control software (Mac®/Windows®/iPad®) and from free Studio One Remote for iPad
    • Compatible with most recording software for Mac and Windows

    Flexible Connectivity

    • Simultaneous I/O up to 26 inputs/32 outputs (8x14 at 192 kHz)
    • Individual stereo main balanced outputs with mono, dim, mute, output metering and level control accessible from front-panel and UC Surface
    • 2 front-panel combo microphone/instrument inputs
    • 8 XMAX remote controllable mic preamps with individually switched 48V phantom power
    • 6 balanced line level direct-to-ADC inputs, available via dual-purpose rear-panel combo jacks
    • 8 balanced TRS ¼” outputs for monitor mixing and speaker switching
    • ADAT / Dual SMUX Optical inputs/outputs: 16x16 channels at 44.1 or 48 kHz; 8x8 channel at 88.2 or 96 kHz
    • Stereo S/PDIF coaxial input and output
    • BNC word clock input and output with low-jitter clocking

    Digitalia

    • USB 3.0 audio interface
    • USB 2.0 compatible
    • 24-bit resolution and up to 192 kHz sampling rate
    • Top-quality 118 dB A/D/A converters

    Physical

    • Road-rugged construction with all-metal chassis and metal knobs
    • 1U rack-mountable
    • 18 VDC external power supply (included)

    Only registered users can write reviews. Please, log in or register