Pricematch:
Contact us via online chat module to request pricematch
The Atomic 3000 DMX is a powerful and rugged, 3000 W high-impact strobe.
Physical
Length : 425 mm (16.7 in.) without bracket
Width : 245 mm (9.6 in.) without bracket
Height : 240 mm (9.4 in.) without bracket
Weight : 7.5 kg (16.5 lbs.) without bracket
Lamp
Type : Xenon discharge
Approved lamps : MAX-15 Xenon (200-240 V power), MAX-7 Xenon (100-120 V power)
Dynamic Effects
Variable strobe : 0 - 650 ms (50 Hz supply), or 0 - 530 ms (60 Hz supply)
Strobe rate : 0 - 25 flashes/second (50 Hz supply), 0 - 30 flashes/second (60 Hz supply)
Blinder effect : Continuous with auto fade
Strobe intensity : Blackout - maximum
Special effects : Ramp up, ramp down, ramp up-down, random flash, lightning, spikes, blinder, single flash
Control and Programming
Control options : DMX, stand-alone, multi-fixture chase (with Detonator remote), MC-1
DMX channels : 1, 3, and 4 channel modes
Stand-alone control : Via N.O. or N.C. SPST switch
Stand-alone options : Selectable flash rate or blinder effect
Setting and addressing : DIP switch
Protocol : DMX512
Receiver : RS-485
Construction
Housing : Steel
Finish : Electrostatic powder-coated
Color : Black
Installation
Minimum distance to combustible materials : 0.5 m (1.6 ft.)
Minimum distance to illuminated surfaces : 1 m (3.3 ft.)
Minimum clearance around fan and air vents : 0.1 m (0.3 ft.)
Orientation : Any
Mounting points : Five 12 mm (0.5 in.) holes in mounting bracket
Connections
Power connection : 1.5 m (4.9 ft.) cable tail, 3 x 2.5 mm2/AWG 13
DMX data in/out : 3-pin and 5-pin XLR sockets
Electrical
AC power (MAX-7 model) : 100-120 V nominal, 50/60 Hz
AC power (MAX-15 model) : 200-240 V nominal, 50/60 Hz
Peak current consumption : 33 A
Typical current consumption (MAX-15, high power mode) : 8 A
Main fuse (all AC power voltages) : 20 AT (slow blow), 250 V
Power supply unit : Auto-ranging electronic switch-mode
Thermal
Maximum ambient temperature (Ta max.) : 40° C (104° F)
Maximum lamp socket temperature : 120° C (248° F)
Lamp
Dynamic Effects
Control and Programming
Construction
Installation
Connections
Electrical
Thermal