Pricematch:
Contact us via online chat module to request pricematch
"The TH12A from Mackie is a high performance PA speaker with 2 amps built in totaling 400w of power, built in EQ and versiatile cabinet shape allowing use . All this at an incredibly affordable price!"
Acoustic Performance
Frequency Range (-10 dB) : 57 Hz - 20 kHz
Frequency Response (-3 dB) : 70 Hz - 18.5 kHz
Horizontal Coverage Angle : 90 Degrees
Vertical Coverage Angle : 60 Degrees
Maximum SPL Long-Term : 112 dB SPL @ 1m
Maximum SPL Peak : 115dB SPL@1m
Input/Output
Input Type : Female XLR Balanced/Unbalanced/li>
Input Impedance : 20k ohms bridging; 10k ohms
Loop-through : Male XLR Balanced/Unbalanced
Level Control : Rotating Knob - 0 dB at center
Sensitivity : +4 dBu for full output (Level control @ center) - -36dBu for full output (Level control @max)
Transducers
Low frequency : 12In/381 mm with steel frame paper cone woofer
High Fequency : Horn-loaded 1 in/25 mm exit compression driver
Power Amplifiers
Low Frequency Power Amplifier :
- Rated Power : 150 watts, 8 ohm load, 300 watts peak
- THD : <0.1%
- Signal-to-Noise Ratio :> -94 dB, 20 Hz to 20 kHz, unweighted, referenced to 138 watts into 8 ohms
- Design: BTL Class D
High Frequency Power Amplifier :
- Rated Power : 50 watts, 4 ohm load 100 watts peak
- THD : <0.1 %
- Signal-to-Noise Ratio :> -97 dB, 20 Hz to 20 kHz, unweighted, referenced to 50 watts into 4 ohms
- Design:Class AB
Electronic Crossover
Crossover Type: 24 dB/octave
Crossover Frequency : 3 kHz
Equalization :
Low Frequency EQ : ±15 dB @ 80 Hz, shelving
Mid Frequency EQ :±15 dB, bandpass, sweepable from100 Hz to 8 kHz
High Frequency EQ :±15 dB @ 12 kHz, shelving
Direct/EQ Switch :Bypasses EQ section
Protection Features :
Over-excursion Protection : econd-order sub-sonic filter
Thermal Protection : Independent amplifier shutdown, auto reset
Driver Protection : Independent HF and LF compressors
AC Power Requirements :
Europe : 240 VAC, 50 Hz
AC Connector: 3-pin IEC 250 VAC, 20 A male
Fuse : 230 VAC: T 3.15 AL/250 V
Power Consumption : 320 watts with music, loud mix - 20 watts quiescent (idle)
Construction Features :
Basic Design : Asymmetrical Trapezoidal
Material: Polypropylene
Finish : Textured
Handles : One on each side, one on top
Grille : Perforated metal with weather-resistant coating Display LEDs
Front : Power ON
Rear : Power ON, OL (overload)
Physical Dimensions and Weight :
Dimensions :
- Height : 23.5 in/596 mm
- Width : 14.5 in/367 mm
- Depth : 12.4 in/314 mm
- Weight : 25.5 lb/11.6 kg
Mounting Methods :
Pole-mountable via the built-in socket on the bottom of the cabinet. Be sure the pole is capable of supporting the weight of the TH-12A.
Input/Output
Transducers
Power Amplifiers
- Rated Power : 150 watts, 8 ohm load, 300 watts peak
- THD : <0.1%
- Signal-to-Noise Ratio :> -94 dB, 20 Hz to 20 kHz, unweighted, referenced to 138 watts into 8 ohms
- Design: BTL Class D
- Rated Power : 50 watts, 4 ohm load 100 watts peak
- THD : <0.1 %
- Signal-to-Noise Ratio :> -97 dB, 20 Hz to 20 kHz, unweighted, referenced to 50 watts into 4 ohms
- Design:Class AB
Electronic Crossover
Equalization :
Protection Features :
AC Power Requirements :
Construction Features :
Physical Dimensions and Weight :
- Height : 23.5 in/596 mm
- Width : 14.5 in/367 mm
- Depth : 12.4 in/314 mm
- Weight : 25.5 lb/11.6 kg
Mounting Methods :
- LF 300W peak power (Class-D)
- HF 100W peak power (Class A/B)
- 12" high-precision woofer
- 1" compression driver