LEXICON MX300-LEXICON

"Our revolutionary MX200 and MX400 changed everything. The great sound of a hardware Lexicon reverb - plus the ability to put that power to work as part of your DAW workflow via PC VST

Connectors Two 1/4" balanced TRS, Two XLR female
Impedance 50k Ohms bal., 25k Ohms unbal.
Input Level +4 dBu nominal, +24 dBu maximum 48kHz or 44.1kHz
Analog Audio Outputs
Connectors Twp 1/4" balanced TRS, Two XLR male
Impedance 2k Ohms bal., 1k Ohms unbal. ¼" only
Output Level +4 dBu or -10 dBV nominal (software adjustable), 24 dBu maximum 48kHz or 44.1kHz
D/A Conversion 24-bit, 44.1/48kHz 128x oversampling
Analog Audio Performance
Frequency Response 10 Hz - 20kHz +0 dB/-0.5 dB
THD+N Dynamic Range >109 dB (A-weighted) A/A
Crosstalk typical Digital Input and Output
Connectors Dual RCA phono (S/PDIF)
Format S/PDIF 24-bit
Sample Rate 44.1kHz or 48kHz
Processing Delay 3.7 ms @ 48 kHz
Frequency Response 10Hz to 22kHz ±0.5 dB @ 48kHz
Control Interface
MIDI In/Thru 5-pin DIN
Footswitch ¼" phone jack
General
Power 100-120 VAC 50/60Hz, 18 Watts, 220-240 VAC 50/60Hz, 18 Watts
Size (W/H/D) 19" x 1.75" x 7.25"*/6.375" (483 x 44 x /185mm*/162 mm) *including knobs.
Weight 5.8 lbs (2.63kg)

The MX300 lets you switch effect routings easily via front panel controls, so you don't have to spend time behind your rack changing cables. Dual Mono sends the Left and Right input signals through Effect 1 and Effect 2 respectively. Each signal is then routed to its respective output, completely independent from the other. Cascade (Series) sends Left and Right input signals first through Effect 1, then through Effect 2, and then routed as a stereo signal to their respective outputs. Dual Stereo (Parallel) routes Left and Right input signals through both effects independently. Both Effects' output signals are then mixed together, and routed to both the outputs as a single stereo signal.
Mono Split sends Left input signal through Effect 1, while the Right input signal is sent through Effect 2. The output signals of both Effects are then mixed together, and routed to both the outputs as a single stereo signal.
Stereo routing provides a single stereo effect path for Left and Right signals. This routing removes one of the effect modules for users requiring a streamlined signal path with only a single effect for their needs - but taking advantage of all of the MX300's processing horsepower.

Features



2-in / 2-out configuration
16 legendary Lexicon® reverbs
Lexicon delays & modulation effects
dbx® compression and de-essing
Input Gain Control for stereo inputs
Intuitive Navigation/Edition with
large LCD screen, Page/Select Wheel, 3 top-level parameter controls plusExit, Tempo and Bypass selectors
5 effect routing options
99 Factory / 99 User programs
USB Hardware Plug-In feature with
VST® and Audio Units plug-in software
MX-Edit Editor/Librarian software
S/PDIF Digital Input/Output
24-bit, 48kHz/44.1kHz sample rates
1/4" footswitch jack
MIDI IN and THRU
XLR and 1/4" TRS balanced I/O
EFFECTS

Reverbs:
Small Hall
Large Hall
Small Plate
Large Plate
Room
Chamber
Gated
Reverse
Vocal Hall
Vocal Plate
Drum Hall
Drum Plate
Ambience
Studio
Arena
Spring
Delays:
Studio Delay
Mono Delay
Tape Delay
Pong Delay
Mod Delay
Reverse Delay
2-Tap Delay
dbx® Dynamics:
Compressor
De-Esser
Modulated Effects
Chorus
Flanger
Phaser
Tremolo / Pan
Rotary
Vibrato
Pitch Shift
Detune
All MX300 reverbs, delays, dynamics and effects parameters can be accessed and edited from the included PC VST® and Macintosh® Audio Units plug-ins.