Pricematch:
Contact us via online chat module to request pricematch
The KRK KNS8400 studio monitoring headphones are designed with producers needs in mind. Allowing producers and musicians to monitor their mixes with the same accuracy and depth as they are used to from their studio monitors.
Listen Up. This is How Your Music is Supposed to Sound.
Whether you are listening to some tracks, or tracking your next recording, the KNS8400 gives you the famous KRK sound independent of your monitors. This closed-back around-the-ear design brings you closer to your music, and the highly isolated surround pads give you the freedom to immerse yourself in the sound without having your monitor mix escape into open microphones -- and keeps live instruments out of what you are monitoring. Having One Voice that consistently gives you accurate reproduction of your music or mix will help you achieve just what the artist intended -- especially if the artist is you.
System / Design
Dynamic
Operating System
Closed-back
Head Coupling
Circumaural (Isolating)
Voice Coil
Copper-clad aluminum wire
Driver Type
Low weight neodymium
Driver Diameter
40mm
Sensitivity/Efficiency
95 dB SPL @1mW
Frequency Response
10Hz-22 kHz
Total Harmonic Distortion
Rated Impedance
36 ohms
Ambient Noise Isolation
up to 26 dBA
Long Term Maximum Power Handling 1000mW
(500mW per side as per IEC 60268-7)
Earcup Rotation
90 degrees
Nominal Headband Pressure
4 N (based on average head size)
Headband Type
Adjustable / Sprung steel skeleton
Ear Cushion type
Acoustic cellular foam
Headpad Finish
Leatherette
Headphone Finish
Black impact resistant plastic
Cable
2.5 m, (8.2 ft.), 99,99% OFC detachable
Connector
Gold-plated stereo 1/8" (3.5 mm)
Cable Connection
Strain relief managed
Adaptor
Screw-on 1/4" (6.3 mm)
Weight without Cable
202 g (0.44lbs)
Net / Shipping Weight
820 g (1.8 lbs)
Dimensions
245mm x 268mm x 94mm
9.6 x 10.5 x 3.7
Whether you are listening to some tracks, or tracking your next recording, the KNS8400 gives you the famous KRK sound independent of your monitors. This closed-back around-the-ear design brings you closer to your music, and the highly isolated surround pads give you the freedom to immerse yourself in the sound without having your monitor mix escape into open microphones -- and keeps live instruments out of what you are monitoring. Having One Voice that consistently gives you accurate reproduction of your music or mix will help you achieve just what the artist intended -- especially if the artist is you.
System / Design
Dynamic
Operating System
Closed-back
Head Coupling
Circumaural (Isolating)
Voice Coil
Copper-clad aluminum wire
Driver Type
Low weight neodymium
Driver Diameter
40mm
Sensitivity/Efficiency
95 dB SPL @1mW
Frequency Response
10Hz-22 kHz
Total Harmonic Distortion
Rated Impedance
36 ohms
Ambient Noise Isolation
up to 26 dBA
Long Term Maximum Power Handling 1000mW
(500mW per side as per IEC 60268-7)
Earcup Rotation
90 degrees
Nominal Headband Pressure
4 N (based on average head size)
Headband Type
Adjustable / Sprung steel skeleton
Ear Cushion type
Acoustic cellular foam
Headpad Finish
Leatherette
Headphone Finish
Black impact resistant plastic
Cable
2.5 m, (8.2 ft.), 99,99% OFC detachable
Connector
Gold-plated stereo 1/8" (3.5 mm)
Cable Connection
Strain relief managed
Adaptor
Screw-on 1/4" (6.3 mm)
Weight without Cable
202 g (0.44lbs)
Net / Shipping Weight
820 g (1.8 lbs)
Dimensions
245mm x 268mm x 94mm
9.6 x 10.5 x 3.7