IK Multimedia iRig Acoustic Stage Digital Microphone System For Acoustic Guitar

iRig Acoustic Stage is a patented, revolutionary digital microphone system that makes your guitar sound exactly as if it was captured with a classic recording studio setup, giving you full rich studio-quality sound on the stage.

It’s a compact acoustic microphone and advanced digital preamplifier and processing unit that recreates a studio microphone set-up providing you with all of the true character and tonal nuance of your acoustic in live playing situations. Simply clip the iRig Acoustic Stage’s microphone to the sound hole, attach it to the iRig Acoustic Stage pre-amplifier processor, then connect the preamp to your amplifier or mixer. iRig Acoustic Stage also features a “Cancel Feedback” button that gets rids of annoying frequency feedback during performance.

Once installed and active, you’ll immediately hear what you’ve been missing with your traditional live setup as your acoustic tone comes alive with vibrance, warmth, depth and earthy, woody tone. If you currently perform with an acoustic-electric, iRig Acoustic Stage can greatly enhance your guitar’s live tone. iRig Acoustic Stage features an AUX input with a blend control that lets you blend your guitar’s current pickup system with iRig Acoustic Stage giving you even greater tonal flexibility and a roundness to your sound like you’ve never heard before.

Built for the Stage and Project/Home Studio
iRig Acoustic Stage provides an enhanced acoustic sound that's perfect for live performance and recording. Getting that "studio" sound in project or home studios with your acoustic is now easier than ever. If you have an audio interface, simply plug iRig Acoustic Stage into the analog input. No interface? No problem! iRig Acoustic Stage also features an integrated class-compliant USB audio output for direct connection to your computer or compatible device. Not only will you get that fantastic sound, but you can also move around freely allowing you to get into the groove and capture your best acoustic performance in your studio.

iRig Acoustic Stage Specifications

Dedicated iRig Acoustic Microphone

• Microphone Type: MEMS
• Polar Pattern: omnidirectional
• Frequency Response: 30 Hz - 20 kHz, +/-3dB
• Max SPL: 130dB SPL
• Signal-to-Noise Ratio: 101 dBA
• Maximum soundboard thickness: 4mm / 0.16"

Connections

• Dedicated iRig Acoustic Microphone Input: 2.5mm / 3/32" TS mono jack
• AUX Instrument Input Connector: 6.3mm / 1/4" TS mono jack
• AUX Instrument Input Impedance: 11 kOhms (active instruments only)
• Analog Output Connector : 6.3mm / 1/4" TS mono jack, line-level, low impedance
• Analog Output Impedance: 50 Ohms (can drive long cables without any loss)
• Digital Output Connector: micro-USB

DSP/Interface

• AD and DA Resolution: 32-bit
• Sampling Rate: 48 kHz
• Interface Output: USB class compliant audio output via micro-USB port
• Power: battery power (2xAA), USB bus power
• Battery Life: approximatively 12 hours of continuous usage with alkaline batteries and 15 hours with rechargeable high quality Ni-MH AA cells (2000 mAh and up)

Package includes

• iRig Acoustic Stage DSP/interface
• Dedicated iRig Acoustic microphone
• Belt clip
• Carrying case
• 2 x 1.5V AA Battery

Dimensions

• DSP/Interface size: 101mm/3.98" x 72.3mm/2.85" x 23mm/0.91" (belt clip excluded)
• DSP/Interface weight: 99g/3.49oz (batteries excluded)
• Microphone size: 31.7mm/1.25" x 32.2mm/1.27" x 18.8mm/0.74"
• Microphone weight: 20g/0.71oz
• Microphone cable length: 150cm/59.1"

Compatibility

iRig Acoustic Stage can be connected to any amplifier, mixer or PA system using a 6.3mm / 1/4" TS mono jack cable.

iRig Acoustic Stage can also be used as USB recording interface for Mac/PC, iOS, Android.

Computers

Mac^®: Mac OS X 10.6 or later. One free USB port.

Windows^®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8/10. See our FAQ here for further details.

A USB to Micro-USB cable (sold separately) is required.

iOS Devices

Compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch 6th generation, iPod touch 5th generation, iPad Pro (9.7-inch), iPad Pro (12.9-inch), iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini. iOS 6.0 or later is required.

A USB to Micro-USB cable (sold separately) and a Lightning to USB Camera Adapter (sold separately) are required.

Android Devices

Compatible with Android devices that support Samsung Professional Audio technology, like the Samsung Galaxy S6, Galaxy S6 Edge, Galaxy Note 4 and Galaxy Note Edge. Samsung Galaxy S5 and Galaxy Note 3 require Android 5.

Compatible with Android devices with USB (OTG) connector running Android apps that use USB (OTG) audio input.

Compatible with any Android devices with USB (OTG) connector running Android 5.

A Micro-USB-OTG to Micro-USB cable (sold separately) is required.