FOSTEX PM841L
PM8.4.1 Professional Studio Monitor Speaker - Left Speaker
Pricematch:
Contact us via online chat module to request pricematch
"The PM8.4.1 is the very first 3-way monitor speaker from Fostex consisting of 8-inch woofer, 4-inch midrange and 3/4-inch tweeter. Powered by a 60W, 18W and 18W independent amplifier for wider frequency range reproduction - a first for a Fostex PM-series monitor."
SPEAKER SECTION
LF driver: 8" (20cm) cone speaker
Midrange dirver: 4" (10cm) cone speaker
HF driver: 3/4" (19mm) soft dome
Frequency Response: 50 Hz - 25kHz (+-3dB)
AMPLIFIER SECTION
INPUT A
Connector: 6mm dia. TRS phone (balanced)
Input Level: -10dBV
Impedance: 20K ohm or more
INPUT B
Connector: XLR-3-31 (balanced)
Input Level: +4dBu
Impedance: 20K ohm or more
OUTPUT POWER: LF 60W, MID 18W, HF 18W
CONTROLS
Low +-3dB at around 60Hz
High +-1dB at around 10kHz
GENERAL
Power Consumption: 60W
Power Requirement: US 120VAC, 60Hz
EUR/UK/AUS 230VAC, 50/60Hz
CHN 220VAC, 50Hz
Dimensions: 270mm (W) x 432mm(H) x 290mm(D)
Net Weight: 13.4kgs
Supplied accessories: IEC power cable
LF driver: 8" (20cm) cone speaker
Midrange dirver: 4" (10cm) cone speaker
HF driver: 3/4" (19mm) soft dome
Frequency Response: 50 Hz - 25kHz (+-3dB)
AMPLIFIER SECTION
INPUT A
Connector: 6mm dia. TRS phone (balanced)
Input Level: -10dBV
Impedance: 20K ohm or more
INPUT B
Connector: XLR-3-31 (balanced)
Input Level: +4dBu
Impedance: 20K ohm or more
OUTPUT POWER: LF 60W, MID 18W, HF 18W
CONTROLS
Low +-3dB at around 60Hz
High +-1dB at around 10kHz
GENERAL
Power Consumption: 60W
Power Requirement: US 120VAC, 60Hz
EUR/UK/AUS 230VAC, 50/60Hz
CHN 220VAC, 50Hz
Dimensions: 270mm (W) x 432mm(H) x 290mm(D)
Net Weight: 13.4kgs
Supplied accessories: IEC power cable
Features:
The LF drivers (PM-2 MkII: 200mm, PM-1 MkII: 160mm, PM0.5 MkII 130mm) have been developed to obtain extremely pure music reproduction by employing the latest technology in cone material.
The cone uses a mixture of cut and milled fibers that are made from aromatic polyamide. It is then impregnated with resins to simultaneously achieve high rigidity and optimum damping.
The cone also has an olefin film thermally adhered to its surface to control frequency response and to establish long term reliability.
The center dust cap is made of non-wood cellulose material and is also impregnated with resin.
The voice coil is made of super high purity copper wire to achieve extremely low distortion.
The20mm soft dome tweeter employs Fostex's UFLC technology (Poly Urethane Film Laminated Cloth) to achieve light weight and high stability performance.
The amplifiers are precisely calibrated to match the performance capability of the drivers
Magnetically shielded for proximate setting to video monitor