Input Connectors: XLR
Input Type: Electronically balanced/unbalanced, RF filtered
Input Impedance: Balanced >50k ohm, unbalanced >25k ohm
Max Input: >+22dBu balanced or unbalanced
CMRR: >40dB, typically >55dB at 1kHz
Output Connectors: XLR
Output Type: Impedance-balanaced/unbalanced, RF filtered
Output Impedance: Balanced 60 ohm, unbalanced 30 ohm
Max Output: >+21dBu balanced/unbalanced into 2k ohms or greater
Bandwidth: 20Hz to 20kHz, +/-0.5dB
Frequency Response: 90 kHz, +0/-3 dB
Signal to Noise Ratio: Ref: +4 dBu, 22 kHz measurement bandwidth
Signal-to-Noise (Stereo Mode): >94dB (Low Output), >93dB (Mid Output), >90dB (High Output)
Signal-to-Noise (Mono Mode): >94dB (Low Output, Low/Mid Output); >92dB (High/Mid Output); >88dB (High Output)
Dynamic Range: > 106 dB, unweighted, any output
THD+Noise: Interchannel Crosstalk: Crossover Frequencies (Stereo Mode): Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High 450Hz to 9.6kHz (x10 setting)
Crossover Frequencies (Mono Mode): Low/Low-Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Low-Mid/High-Mid: 450 Hz to 9.6 kHz; High-Mid/High: 450 Hz to 9.6 kHz
Crossover Filter Type: Linkwitz-Riley, 24 dB/octave, state-variable
Low cut Switch: Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel.
Phase Invert Switch: Inverts the phase at the output, one switch per output.
x1 / x10 Switch: Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel.
Mode Switch: Selects stereo/mono and 2/3/4-way operation
LF Sum Switch: Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2's low output phase invert LED to indicate that this output is not operational in the LF sum mode.
Indicators: Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output)
Operating Voltage: 100-120 VAC 50/60Hz; 120 VAC 60Hz 230 VAC 50/60Hz
Operating Temperature: 32°F to 113°F (0°C to 45°C)
Power Consumption: 15W
Power Connector: IEC receptacle
Dimensions: 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm)
Unit Weight: 4.0 lbs. (1.8 kg)
Shipping Weight: 5.8 lbs. (2.6 kg)
XLR balanced ins and outs
Mode switches for mono 4-way or stereo 2-way/3-way operation
Low frequency summed (subwoofer) output
x10 range switch on both channels
40Hz high pass (low cut) filter both channels
Phase reverse switch on all outputs
Individual level controls on all outputs
24dB per octave Linkwitz-Riley filters (the professional standard)
Stereo/Mono status LEDs indicate the selected mode
dbx® 2 year parts and labor as standard
CSA NRTL/C approved
CE compliant