DBX 231

"You can expect nothing but rock solid performance from the DBX range. The 231 is no exception delivering precise control to optimize the sound in any room. Perfect for club, mobile DJ's and bands."

Input Connectors : 1/4" TRS, female XLR (pin 2 hot)

Input Type : Electronically balanced/unbalanced, RF filtered

Input Impedance : Balanced 40k ohm, unbalanced 20k ohm

Input Max Input Level : >+21dBu balanced or unbalanced

CMRR : >40dB, typically >55dB at 1kHz

Output Connectors : 1/4" TRS, male XLR (pin 2 hot)

Output Type : Impedance-balanaced/unbalanced, RF filtered

Output Impedance : Balanced 100 ohm, unbalanced 50 ohm

Max Output Level : >+21dBu balanced/unbalanced into 2k ohm or greater
>+18dBm balanced/unbalanced (into 600 ohm)

Bandwidth : 20Hz to 20kHz, +0.5/-1dB

Frequency Response : 50kHz, +0.5/-3dB

Dynamic Range : 108dB

Signal-to-Noise : 90dB

THD+Noise :

Interchannel Crosstalk :

EQ Bypass : Bypasses the graphic equalizer section in the signal path

Low Cut : Activates the 50Hz 12dB/octave high-pass filter

Range : Selects either +/- 6dB or +/- 12dB slider boost/cut range

Operating Voltage : 100VAC 50/60Hz, 120VAC 60Hz, 230VAC 50/60Hz

Power consumption : 15W

Main Connection : IEC receptacle
Note: Specifications subject to change without notice.

Two 31-band, 1/3-octave Constant Q frequency bands

Switchable boost/cut ranges of ±6 or ±12 dB

12dB per octave 40Hz low-cut filter

Front panel bypass switch

±12 dB input gain range

4-segment LED ladders for monitoring output levels

XLR and TRS Inpts and Outputs

Internal Toroidal Transformer

Frequency Repsonse of <10Hz to >50kHx

Dynamic range of greater than 108dB