Audio Technica AT-VM95C-H Cartridge & Headshell
The Audio Technica AT-VM95C-H is an AT-VM95C conical stereo cartridge preassembled on an AT-HS6 Headshell.
Key Features:
- AT-VM95C mounted on AT-HS6BK headshell
- Conical stereo cartridge
- The total set weight is 15.5g
- Assembled and tested in the Audio-Technica Factory in Fukui-Japan
view all Audio Technica products
Product Code: 100300034
Pricematch:
Contact us via online chat module to request pricematch
The Audio Technica AT-VM95C-H is an AT-VM95C conical stereo cartridge preassembled on an AT-HS6 Headshell.
The AT-VM95C is Audio-Technica's entry model Conical cartridge replacing the legendary AT90 Series models such as AT91, AT91R and CN5625AL.
The VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.
| Model | AT-VM95C/H |
| Type | VM Stereo Dual Magnet |
| Mounting | 1/2” centres |
| Frequency Response | 20 - 20,000 Hz |
| Channel Separation | 18 dB (1 kHz) |
| Output Channel Balance | 2.5 dB (1 kHz) |
| Output Voltage | 4.0 mV (@ 1 kHz, 5 cm/sec) |
| Vertical Tracking Angle | 23° |
| Vertical Tracking Force Range | 1.8 - 2.2g (standard 2.0 g) |
| Stylus Shape | Conical |
| Stylus Size | 0.6 mil |
| Stylus Construction | Bonded Round Shank |
| Cantilever | Aluminium Pipe |
| Coil Impedance | 3.3 kΩ (1 kHz) |
| Coil Inductance | 550 mH (1 kHz) |
| DC Resistance | 485 Ω |
| Static Compliance | 17 x 10 – 6 cm / dyne |
| Dynamic Compliance | 6.5 x 10 – 6 cm / dyne (100 Hz) |
| Wire Used for Coil | T.P. Copper |
| Recommended Load Impedance | 47,000 Ω |
| Recommended Load Capacitance | 100-200 pF |
| Weight | 15.5 g |
| Dimensions | 21.2 × 21.4 × 62.4 ( H x W x D mm) |
| Replacement Stylus | AT-VMN95C |
