ART HeadAmp 6 Channel Headphone Amplifier

The HeadAmp6 is a fully-featured six -channel stereo headphone amplifier that includes six auxiliary inputs to allow separate more-me mixes on each headphone channel.Each output channel has a dual function Balance Control which will pan between Left & Right input of the main signal bus, or vary the mix between the main stereo signal bus and the auxiliary input for that respective channel.

Input Connections: XLR-F balanced (2),
¼-inch balanced (9)
Output Connections: XLR-M balanced (2),
¼-inch balanced (2),
¼-inch stereo headphone (18)
Input Impedance: 40K Ohms Main,
10K Ohms Direct,
15K Ohms Aux In
Output Impedance: Maximum Input Level: +21dBu (all inputs)
Maximum Output Level: 150mW (600 Ohm Headphones)
500mW (32 Ohm Headphones)
150mW (8 Ohm Headphones)
Maximum Gain: 22dB
Signal to Noise Ratio: >90dB typical
THD: <.01 typical="">Dynamic Range: >101dB typical
CMRR: >40dB
Phase Shift: Power Requirements: 120VAC / 50-60Hz, or 230VAC / 50 Hz, 15 Watts
Dimensions: (HxWxD inch) 1.75 x 19 x 6
Dimensions: (HxWxD mm) 44.5 x 483 x 152
Weight: 5.3 lbs. (2.4kg)
Ref: 0 dBu = 0.775VAC RMS

Six Independent High-Power Headphone Amplifier Channels

Dual Function Balance/Mix Control per Channel

Front Panel Stereo Aux Input for each Channel

Multiple Monitoring Settings per Channel

Individual Output Level Control per Channel

Precision Four Segment LED Metering Per Channel

Master Volume Control w/ Eight Segment LED Metering

Front Panel Direct In Jack

One Front and Two Rear Mounted Headphone Jacks per Channel

Connects and Drives up to 18 Headphones Simultaneously

XLR and 1/4" Main Inputs and Outputs

Parallel Main Outputs for Multiple Unit Use